trigger output
英 [ˈtrɪɡə(r) ˈaʊtpʊt]
美 [ˈtrɪɡər ˈaʊtpʊt]
网络 触发输出
双语例句
- One of the most powerful features of the IBM trace engine is its ability to trigger on trace events, which is vital for creating targeted trace output and reducing the volume of trace data produced.
IBM跟踪引擎最强大的特性之一是它能够在发生跟踪事件时触发，这有助于创建目的明确的跟踪输出并减少产生的跟踪数据量。 - Using the trigger column "CustomerID," the output will generate a new record containing a single XML document only when the" CustomerID "field is changed to a new value.
通过使用触发器列CustomerID，仅当CustomerID字段被更改为一个新值时，输出将生成一条包含一个XML文档的新记录。 - In production, the trigger monitor would normally be started as a queue manager service and its output would be redirected to log files.
在生产中，触发器监控器通常作为一个队列管理器服务启动，它的输出将被重定向到一些日志文件。 - In many organizations, there is a formal body charged to run a technology scan, this trigger is normally tied to their output.
在许多组织中，由一个正式机构负责考察新技术，当他们发现有用的新技术时，通常会触发治理过程审查。 - A single trigger pulse generating circuit outputs a pulse signal when an output level of an amplifying unit is changed.
单触发脉冲产生电路在放大单元的输出电平改变的时刻输出脉冲信号。 - If the liquid in the diaphragm cavity to promote too little to promote liquid, the magnet will move to the ZSL trigger, the trigger output of a pulse signal to the PLC control box.
如果在隔膜泵推进液腔内推进液太少，磁体将移动到触发器ZSL处，触发器输出一个脉冲信号到PLC控制箱。 - The camera can send ane-mail alert to designated users and trigger its two output ports to control external devices.
摄像机还能发送邮件提醒指定用户，并触发两个输出端口用以控制外部设备。 - Mixmaster includes a trigger output, derived from one of the12 input signals, which can be used to synchronise the scope to a known cylinder.
该信号混合器包括一个触发输出，来自12个输入信号中的一个，它被用于同步示波器到一个已经知道的汽缸。 - Most switch mainframes can be triggered externally via the trigger input and can send an output trigger pulse when the relay contacts have settled.
大多数开关主机都可通过触发输入进行外部触发，并且在继电器触点稳定之后可输出一个触发脉冲。 - The A1210-A1214 Hall-effect latches include the following on a single silicon chip: voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
在A1210-A1214霍尔效应锁存包括一个单一的硅芯片上以下内容：稳压器，霍尔电压发生器，小信号放大器，施密特触发器和NMOS输出晶体管。 - So we can control the population which can trigger the Q-switch by controlling the superradiant convert electrical level in the superradiant detector and then the laser output can be stabilized.
只要控制接收器中超辐射的光电转换电平，就能控制打开Q开关时的反转粒子数，也就能稳定输出的巨脉冲激光。 - To satisfy the request of heavy current in the large capacity SCR trigger, a special designed pulse output circuit was presented.
文章介绍了以80C196KC单片机为核心的大功率晶闸管数字触发电路系统，这个系统针对大容量晶闸管触发电流大的要求，专门设计了大功率的脉冲输出电路。 - The hardware processing method includes adding Smiter trigger in RC filter circuit to plastic the output wave of filter circuit, acquiring front steep output signal of and making reverse operation in CPLD.
硬件处理方法是在RC滤波电路的输出端加施密特触发器，对滤波电路的输出整形，取得前沿很陡的输出信号，并在CPLD中对信号作反相处理。 - A trigger circuit is designed to control laser output by computer.
设计了激光触发控制电路，由微机发送指令控制激光触发； - Data selector alternately to realize the functions of double edge trigger addition counter output the odd and even data in two counters.
数据选择器则将两个计数器中处于保持状态的奇偶数据交替输出，实现双边沿触发加法计数器的功能。 - The experiment shows that this trigger scheme can fully collect the whole output signals of the wire chamber for the random cosmic ray events and get rid of the problem of signal loss caused by the delay of sampling gate.
实验证明，这种方法能完整地收集随机出现的宇宙线事例信号的全部电荷，解决了由于取样门延迟打开所造成的信号电荷丢失问题。 - This control system realizes zero-crossing detecting circuit and synchronous zero-crossing trigger of an ordinary bi-directional SCR of which the power output is adjustable.
设计了一种过零检测电路，利用硬件方法实现普通双向可控硅的同步过零触发从而实现功率可调。 - Experiments are setup to compare the characteristics of the two materials, such as the time response speed, the trigger laser energy threshold of open and saturated state, the nonlinear operation mode and the output stability.
比较了这两种材料制作的不同电极间隙类型的光导开关的开关时间响应速度、导通光能与饱和触发激光能量、线性与非线性工作模式及触发稳定性等特性。 - In the control circuit, the digital pulse strings produced by the MCU trigger the thyristors to shift phases, through changing the control angle, the voltage output could be changed.
控制电路由单片机产生数字脉冲串对晶闸管触发移相，通过改变控制角来改变输出电压的大小； - Chapter 3 principally analyses the key problems in the design of decoder, which includes RC oscillator, POR ( Power-on Reset), Schmitt trigger, data detect module, model control logic module and data output logic module, then gate simulation is completed by Verilog_XL tool.
本文第三章设计了解码芯片的部分电路模块，包括振荡器电路、上电复位电路、施密特触发器电路、数据检测模块、型号控制逻辑模块、按键防抖动模块以及数据输出逻辑模块。 - DSP was in charge of completing the interface of men and machine, the decision of zero-current, trigger angle computing on line, D/ A output display.
DSP负责完成人机接口、负载电流的测量、十二路零电流信号的判断、十二路触发时刻的在线计算、D/A输出显示； - A digital high-performance integrated thyristor trigger is introduced. It can output two phase difference 180 ° modulated pulse sequence directly with better protection function and without external jagged wave synchronous capacitor.
本文介绍了一种高性能晶闸管数字触发器，它可以输出两路相位互差180°的调制脉冲列，保护功能完善，且不需要外接锯齿波电容。 - On condition that circuit consisting of D type Flip flops, CP is used to trigger siganl of Flip flops, and CP is used to sample output.
对用维一阻型D触发器的电路，则以CP作触发器的触发信号，并以CP取样取出。 - On the other hand, random changes of trigger signal transmission delay time and stray capacitor in the circuit worsen the modulator's output pulse quality and efficiency.
电路中器件离散性与系统分布参数会造成调制器输出波形质量下降，效率降低。 - To set up a sync point coincide with a natural commutation point in OTC products, and will be able to improve reliability and stability of the phase shifting trigger and output of the power source.
OTC有关产品把同步点设计在自然换相点上，使同步移相触发和电源输出更趋稳定可靠。 - A regulator circuit consist of benchmark circuit, compare circuit, checking circuit, trigger circuit for system checking circuit is designed to output steady DC voltage at variable speed and variable load;
分析了混合励磁发电机的稳压原理，设计了由基准电路、比较电路、控制电路、触发电路等组成的系统控制电路，保证发电机在宽转速宽负载范围内输出电压稳定的直流电。 - The experimental results indicated that the voltage regulator can through the thyristor phase shifting trigger pulse signal which controls the winding the exciting current, and makes the power winding output voltage maintenance to be stable.
实验结果表明：电压调节器能够通过晶闸管移相触发脉冲信号来控制控制绕组的励磁电流，使电机功率绕组输出电压保持稳定。 - Pulse shaping circuit utilizes the Schmitt trigger structure to increase the output drive capability.
脉冲整形电路采用了施密特触发器结构，将信号整形的同时，增大了输出驱动能力。